English
 |
Share to:
4SPM Deep Well Pump
For pumping clean water with sand content less than150g/m3.
For well pumping, river pumping, farm irrigation, water supply, mining, drainage in breeding industry.
For well pumping, river pumping, farm irrigation, water supply, mining, drainage in breeding industry.
| Quantity: | |
|---|---|
Pump body | AISI304 SS |
| Motor bracket | Stainless steel |
Motor shaft | AISI304 SS |
| Pump shaft | AISI304 SS |
| Impeller | AISI304 SS |
| Diffuser | AISI304 SS |
| Bearing | C&U, NSK if request |
| Mechanical seal | Ceramic /Graphite, SIC/Graphite or AlloyGraphite if request |
| Coupling and outlet | Brass,Stainless steelor Cast iron if request |
| Shaft coupling | AISI304 SS |
| Bearing bush | AISI304 SS |
| Oil chamber | Cast iron,Cast-Cu if request |
Technical Parameters
Structure
Operating Conditions
● Water temperature up to 35℃
● Ambient temperature permissible up to 40℃
● 4SPM Minimum internal diameter of well:4"(100mm)
● Maximum sand content:0.25%
● Maximum immersion depth:80m
Pump body | AISI304 SS |
| Motor bracket | Stainless steel |
Motor shaft | AISI304 SS |
| Pump shaft | AISI304 SS |
| Impeller | AISI304 SS |
| Diffuser | AISI304 SS |
| Bearing | C&U, NSK if request |
| Mechanical seal | Ceramic /Graphite, SIC/Graphite or AlloyGraphite if request |
| Coupling and outlet | Brass,Stainless steelor Cast iron if request |
| Shaft coupling | AISI304 SS |
| Bearing bush | AISI304 SS |
| Oil chamber | Cast iron,Cast-Cu if request |
Technical Parameters
Structure
Operating Conditions
● Water temperature up to 35℃
● Ambient temperature permissible up to 40℃
● 4SPM Minimum internal diameter of well:4"(100mm)
● Maximum sand content:0.25%
● Maximum immersion depth:80m
