English
 |
Share to:
SJET SELF-PRIMING Water PUMP
Suitable for use with clean water even where air is present and with liquids that are not chemically aggtrssive towards the materials from which the pump is made.
The pumps are designed to pump water even in cases where air is present. As a result of their quietness,reliability and low energy consumption they are recommended for use in domestic and civil applications such as the pressure sets,and in rain water recovery and irrigation system,etc.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
The pumps are designed to pump water even in cases where air is present. As a result of their quietness,reliability and low energy consumption they are recommended for use in domestic and civil applications such as the pressure sets,and in rain water recovery and irrigation system,etc.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
| Quantity: | |
|---|---|
| Pump body | AISI304 SS |
| Pump support | Aluminum |
| Motor housing | Aluminum |
| Impeller | Brass, AISI304 SS if request |
| Diffuser | Noryl |
| Motor shaft | AISI304 SS |
| Mechanical seal | Ceramic/Graphite |
Technical Parameter
| NO. | MODEL | POWER | Q(m3/h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | |
| KW | HP | Q(l/min) | 0 | 10 | 20 | 30 | 40 | ||
| A | SJET-60C | 0.37 | 0.5 | H | 35 | 29 | 21 | 16 | 13 |
| B | SJET-80C | 0.55 | 0.75 | 42 | 38 | 30 | 24 | 20 | |
| C | SJET-100C | 0.75 | 1 | 45 | 42 | 34 | 28 | 23 | |
Structure
Operating Conditions
● Liquid temperature up to 60℃
● Ambient temperature up to 40℃
● Total suction lift up to 9m
| Pump body | AISI304 SS |
| Pump support | Aluminum |
| Motor housing | Aluminum |
| Impeller | Brass, AISI304 SS if request |
| Diffuser | Noryl |
| Motor shaft | AISI304 SS |
| Mechanical seal | Ceramic/Graphite |
Technical Parameter
| NO. | MODEL | POWER | Q(m3/h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | |
| KW | HP | Q(l/min) | 0 | 10 | 20 | 30 | 40 | ||
| A | SJET-60C | 0.37 | 0.5 | H | 35 | 29 | 21 | 16 | 13 |
| B | SJET-80C | 0.55 | 0.75 | 42 | 38 | 30 | 24 | 20 | |
| C | SJET-100C | 0.75 | 1 | 45 | 42 | 34 | 28 | 23 | |
Structure
Operating Conditions
● Liquid temperature up to 60℃
● Ambient temperature up to 40℃
● Total suction lift up to 9m
