Availability: | |
---|---|
Quantity: | |
Product introduction:
Aluminum housing, aluminum front and back cover, aluminum terminal box, aluminum feet which is removable. The installation position can be changed.Terminal box comes with power wire protection screw sleeve. Light-weight, high thermal conductivity, low noise, energy saving and beautiful appearance. Long service life, good sealing, oxidation resistance, corrosion resistance, which result in usage in humid environment no matter indoor or outdoor.The motor is widely used for single-phase power source such as fan, water pump and other light-loading start equipments.
Operating conditions:
Ambient air temperature:-15℃≤0≤40℃ Altitude:≤1000m
Rated frequency:50Hz/60Hz
Wiring method: the rotation direction of motor can be changed by the wiring method
Working type:S1 (continuous working system)
Insulation class: B
Protection grade:IP54 or lP55
Cooling type:IC411
A three-phase asynchronous motor is a type of motor that is powered by 380V three-phase AC power supply (phase difference 120 degrees) at the same time. Because the rotor and stator rotating magnetic field of the three-phase asynchronous motor rotate in the same direction and different speeds, there is a rotation Difference rate, so it is called a three-phase asynchronous motor.
When the three-phase stator windings of the motor are connected to three-phase symmetrical alternating current, a rotating magnetic field will be generated. The rotating magnetic field cuts the rotor windings, thereby generating induced current in the rotor windings (the rotor winding is a closed path), and the current-carrying rotor conductor is Under the action of the stator rotating magnetic field, an electromagnetic force is generated, thereby forming an electromagnetic torque on the motor shaft, driving the motor to rotate, and the direction of the motor rotation is the same as the direction of the rotating magnetic field.
When a conductor cuts the lines of magnetic force in a magnetic field, an induced current is generated in the conductor, hence the name "induction motor". The combined action of the induced current and the magnetic field exerts a driving force on the motor rotor.
Product introduction:
Aluminum housing, aluminum front and back cover, aluminum terminal box, aluminum feet which is removable. The installation position can be changed.Terminal box comes with power wire protection screw sleeve. Light-weight, high thermal conductivity, low noise, energy saving and beautiful appearance. Long service life, good sealing, oxidation resistance, corrosion resistance, which result in usage in humid environment no matter indoor or outdoor.The motor is widely used for single-phase power source such as fan, water pump and other light-loading start equipments.
Operating conditions:
Ambient air temperature:-15℃≤0≤40℃ Altitude:≤1000m
Rated frequency:50Hz/60Hz
Wiring method: the rotation direction of motor can be changed by the wiring method
Working type:S1 (continuous working system)
Insulation class: B
Protection grade:IP54 or lP55
Cooling type:IC411
A three-phase asynchronous motor is a type of motor that is powered by 380V three-phase AC power supply (phase difference 120 degrees) at the same time. Because the rotor and stator rotating magnetic field of the three-phase asynchronous motor rotate in the same direction and different speeds, there is a rotation Difference rate, so it is called a three-phase asynchronous motor.
When the three-phase stator windings of the motor are connected to three-phase symmetrical alternating current, a rotating magnetic field will be generated. The rotating magnetic field cuts the rotor windings, thereby generating induced current in the rotor windings (the rotor winding is a closed path), and the current-carrying rotor conductor is Under the action of the stator rotating magnetic field, an electromagnetic force is generated, thereby forming an electromagnetic torque on the motor shaft, driving the motor to rotate, and the direction of the motor rotation is the same as the direction of the rotating magnetic field.
When a conductor cuts the lines of magnetic force in a magnetic field, an induced current is generated in the conductor, hence the name "induction motor". The combined action of the induced current and the magnetic field exerts a driving force on the motor rotor.