 |
Swimming pool pumps(HFC-02)
| Quantity: | |
|---|---|
Application
Filter centrifugal pumps are designed for cleaning swimming pool, They are suitable to transfer high volumes of water(not exceeding 45°C) against low head.
The pump should be installed in an enclosed environment, or at least sheltered from iclement weather.
Motor
※ Two-pole induction motor(n=2850 r.p.m)
※ Insulation Class B
※ Protection IP44
※ Continuous service S1
※ Thermal protector for single phase
Operating conditions
※ Liquid temperature up to 45°C
※ Ambient temperature up to 40°C
※ Total suction lift up to 8m
Component Construction
※ Pump body: Techno-polymer
※ Pump support: Aluminum
※ Motor housing: Aluminum
※ Impeller: Techno-polymer
※ Motor shaft: AISI304 SS
※ Mechanical seal: Ceramic/Graphite
Product Information
This pool pump blends cost-efficient design with durable construction,it features a totally balanced, efficient Noryl impeller to produce higher flow rates at less horsepower than other pumps, so users can run pump less and save on electricity.
FAQ
Q1: Are you a factory or just a trading company?
A1: Manufacturer,and we focus on the development and production of water pump for more than 20 years.
Q2: Is customized service available?
A2: Of course, OEM & ODM both are available.
Q3: How can I get the quotation?
A3: Leave us message with your purchase requirements and we will reply you within one hour on working time. And you may contact us directly by Trade Manager.
Q4:Can I buy one as sample?
A4: Yes, of course.
Q5: How about your quality control?
A5: Our professional QC will check the quality during the production and do the quality test before shipment.
Application
Filter centrifugal pumps are designed for cleaning swimming pool, They are suitable to transfer high volumes of water(not exceeding 45°C) against low head.
The pump should be installed in an enclosed environment, or at least sheltered from iclement weather.
Motor
※ Two-pole induction motor(n=2850 r.p.m)
※ Insulation Class B
※ Protection IP44
※ Continuous service S1
※ Thermal protector for single phase
Operating conditions
※ Liquid temperature up to 45°C
※ Ambient temperature up to 40°C
※ Total suction lift up to 8m
Component Construction
※ Pump body: Techno-polymer
※ Pump support: Aluminum
※ Motor housing: Aluminum
※ Impeller: Techno-polymer
※ Motor shaft: AISI304 SS
※ Mechanical seal: Ceramic/Graphite
Product Information
This pool pump blends cost-efficient design with durable construction,it features a totally balanced, efficient Noryl impeller to produce higher flow rates at less horsepower than other pumps, so users can run pump less and save on electricity.
FAQ
Q1: Are you a factory or just a trading company?
A1: Manufacturer,and we focus on the development and production of water pump for more than 20 years.
Q2: Is customized service available?
A2: Of course, OEM & ODM both are available.
Q3: How can I get the quotation?
A3: Leave us message with your purchase requirements and we will reply you within one hour on working time. And you may contact us directly by Trade Manager.
Q4:Can I buy one as sample?
A4: Yes, of course.
Q5: How about your quality control?
A5: Our professional QC will check the quality during the production and do the quality test before shipment.
